Description
Choose a perfect exterior for your house from an extensive range of tints and shades. Our Weather Protector is completely eco-friendly with and its special formula protects the exterior walls from all sorts of harsh weather. This exclusive formula provides complete protection against dirt, algae, flaking and alkali. Either it’s raining or the Sun is spreading the harsh rays, our Weather Protector ensures that the outlook of your home remains the same for many years.
- Eco friendly
- Full protection against the harshness of weather
- 100% satisfaction
- Available in more than 50 shades
- Recoat duration is 4-5 hours
RECOMMENDED USE
Interior use for concrete, masonry surfaces, walls, ceilings and soft board surfaces suitable for new and repainting projects.
PRODUCT INFORMATION
Binder
Modified Acrylic
No. of Components
1
Binder
Modified Acrylic
No. of Components
1
Solids (% by Volume)
38 ± 2 %
Flash Point
Non-Flammable
Colour
White
Finish
Satin
APPLICATION INFORMATION
Substrate
Concrete, Masonry, Plaster
Recommended No. of Coats
2
Recommended Wet Film Thickness
80 µm / Coat
Recommended Dry Film Thickness
30 µm / Coat
Theoretical Spreading Rate @ 30.4µm
13 m2 / L / Coat
Drying Agent
Evaporation, Coalescence
Drying Time
Touch Dry 30 min Recoat 90 min
Drying Time
Touch Dry 30 min Recoat 90 min
APPLICATION METHODS
Applied By
Brush / Roller / Spray
Thinner
Thinner
Clean Up
Clean Water
Recommended Dry Film Thickness
30 µm / Coat
PACKAGING & STORAGE
Packaging
1L, 5L
Shelf Life
12 months – Unopened
Storage
cool, dry, and well
a ventilated area away
from heat and direct sunlight.
The lid must be kept tightly closed.
Recommended Wet Film Thickness
80 µm / Coat
Surface Preparation
New Masonry Substrate
Allow all new surfaces to dry out thoroughly, preferably for at least 28 days drying time, or check moisture content for less than 16%. Surface imperfections, misalignments, and protrusions shall be made good and patched up. All surface contaminants such as laitance, dust, and loose cement shall be removed using scraper, sandpapers, and clean stilt brushes
Previously Painted Surfaces
All loose or defective paintwork or powdery residues shall be thoroughly removed by high-pressure water jet cleaning. Treat any areas affected by mold, lichens, algae, and moss with “Reliable Paints”. Make good minor defects with an appropriate suitable exterior putty sealant.
Application & Cleaning Instructions
The paint is ready for use after thorough stirring. Thinning is not normally necessary, however, if required for better workability, do not exceed 5% of dilution ratio. Clean up equipment with water immediately after use.
Health & Safety
Ensure good ventilation during application and drying. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soa,p and water. During spray application, do not breathe in mist and wear suitable respiratory protective equipment. Keep out of reach of children.
Typical Recommended Painting System
SUBSTRATE: Concrete, Masonry, Plaster
| System | Product | No. of Coats |
|---|---|---|
| Sealer | Wall Sealer 100 / Koresil 400 | 1 |
| Finish | Korevon Silk | 2 |
SUBSTRATE: Previously Painted Concrete, Masonry, Plaster
| System | Product | No. of Coats |
|---|---|---|
| Sealer | Wall Sealer 100 / Koresil 400 | 1 |
| Finish | Korevon Silk | 2 |
Reviews
There are no reviews yet.