Our Reliable Matt Finish Enamel is a product specifically for interior and exterior metal or wood surfaces. It is a perfect choice to use on doors, windows, grills etc. By offering complete coverage and a refined finish, this product gives a new life to the surface. Its oil modified alkyd-based formula protects the surfaces and gives them an entirely new look.
Modified Acrylic
1
Modified Acrylic
1
38 ± 2 %
Non-Flammable
White
Satin
Concrete, Masonry, Plaster
Non-Flammable
80 µm / Coat
30 µm / Coat
13 m2 / L / Coat
Evaporation, Coalescence
Touch Dry 30 min Recoat 90 min
Touch Dry 30 min Recoat 90 min
Brush / Roller / Spray
Thinner
Clean Water
30 µm / Coat
1L, 5L
12 months – Unopened
cool, dry, and well
a ventilated area away
from heat and direct sunlight.
The lid must be kept tightly closed.
80 µm / Coat
Allow all new surfaces to dry out thoroughly, preferably for at least 28 days drying time, or check moisture content for less than 16%. Surface imperfections, misalignments, and protrusions shall be corrected and patched up. All surface contaminants such as laitance, dust, and loose cement shall be removed using scraper, sandpapers, and clean stilt brushes.
All loose, defective paintwork or powdery residues shall be thoroughly removed by high-pressure water jet cleaning. Treat any areas affected by mold, lichens, algae, and moss with Reliable’s plastic emulsion. Make good minor defects with an appropriate suitable exterior putty sealant.
The paint will be ready for use after thorough stirring. Thinning is not normally necessary, however, if required for better workability, do not exceed 5% of the dilution ratio. Clean up equipment with water immediately after use.
Ensure good ventilation during application and drying. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap, and water. Do not breathe in mist during spray application and wear suitable respiratory protective equipment. Keep out of reach of children.
| SYSTEM | PRODUCT | NO. OF COATS |
|---|---|---|
| Sealer | Wall Sealer 100 / Koresil 400 | 1 |
| Finish | Korevon Silk | 2 |
| SYSTEM | PRODUCT | NO. OF COATS |
|---|---|---|
| Sealer | Wall Sealer 100 / Koresil 400 | 1 |
| Finish | Korevon Silk | 2 |
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod
This company has been established in the year 2013. The company’s foundation was laid with the hands of Affaq Ahmed and Adeel Ahmed,
021 35158817
021 35158763
reliablepaint01@gmail.com
This Website Design & Developed By Vivo-Tech
Copyright © 2024 All rights reserved.
Reviews
There are no reviews yet.